Like there’s many ways to prepare an egg, there are various kinds of auto washes. You can locate them close to you by using itscarwash.com And don’t assume that it will suggest that every washing method is equal, far from it. Each has their own set of advantages and disadvantages. These pros and cons however, can be a bit hazy. This is why we’ve decided to review every method of washing by separating the good from the bad aspects to help you navigate the most crucial aspect of car maintenance.
Method #1: Handwash
If you ask any detailing expert, they’ll inform you of the safest method of washing your car. is to hand-car wash. There are a variety of methods that a handwash is done that range from the classic two-bucket technique to the latest pressure-filled foam cannons but regardless of how you do it the same thing is that you (or your personal detailer) washing the with soap and washing your vehicle using an easy-to-handle mitt. What exactly is a handwash like? In our detailing facility, Simon’s Shine Shop, we begin with a pre-wash where we cover the car with snow foam, then wash the car clean. It’s not absolutely necessary however, it can help us to get a thorough clean. After that, we paint the vehicle with a layer of suds. is then agitated using wash mitts that are soft. The foam breaks the dirt down, while the wash mitts break the particles loose. After that, we wash and dry. This kind of washing requires an extensive amount of time, along with a wide range of equipment, and , if you’re having it done by an expert, a little of cash. However, between how soft it’s on the surface and how effective it is at removing dirt, it’s the most efficient type of car wash you could perform.
PROS:
- Reduces scratching
- Can remove heavy contamination
CONS:
- It takes longer than other methods.
- Costlier than automated washes
- It requires more equipment than other methods.
- Requires lots of water
- It is difficult to accomplish this with a small space
- It’s difficult to complete in colder temperatures.
Method #2: Waterless Wash
A waterless wash requires only one spray bottle, and some microfiber towels. Spray the area using your waterless wash product and wipe the surface with a microfiber cloth. The reason people use waterless wash is various reasons. They don’t have enough space to wash their hands and they aren’t able to wash with water, they’re in the middle of a road trip, etc. It’s basically an option of the last choice. Why’s that? The reason is that waterless washes don’t work good at getting rid of heavy gunk. They’ll quickly get rid of dust however, if you’ve just came back from a trip off-roading along a muddy trail, you’re unlikely to be able to get much success. Another issue is their possibility of scratching. Although waterless wash products are specifically designed to coat the surface with lubricant but they’re not quite as close to the slickness that comes from an foamy handwash. There’s an excellent chance that you’ll get up and drag a particles across your surface which can cause scratches.
PROS:
- It’s not as time-consuming as handwashes or rinseless wash
- It is possible to do this with a limited space
- Doesn’t drink water.
- It only requires a waterless washing item and towels made of microfiber
CONS:
- More opportunities to scratch
- Can’t remove heavy contamination
Method #3: Rinseless Wash
A rinseless wash is distinct from a waterless wash. In a sense it’s like an amalgamation of handwashes and a waterless wash. When you use a rinseless wash it’s a matter of taking a small amount of your rinseless washing products and blend it with an ice bucket. There won’t be any suds. That’s the reason you don’t have to rinse. The only thing you have to do after you’ve washed the area is to wipe it down until dry. Rinseless washes are done using wash mitts, and microfiber towels. A lot of detailers prefer using the “Garry Dean Method”, that involves soaking a number of microfiber towels inside a container that is filled with rinseless wash product as well as water. Take one towel and wring it out and place it in a bucket to dry. After that, you spray the panel with a pre-wash solution and grab a wet microfiber towel, and begin cleaning. Then, you take your wrung-out drying towel, then dry the panel and the final step is to grab a new dry microfiber to complete dry process. Repeat the process panel-by-panel until your car is spotless. Rinseless washing is a method that is preferred by those who have water restrictions or who have limited space and also those who are concerned about the scratching that a waterless washing can cause. The method still causes more scratches than handwashes, but significantly less than a handwash. Also, you won’t be able remove the heavy dirt as you can by handwashing.
PROS:
- Could be quicker than hand washing
- Requires less water than handwash
- It requires less equipment than handwashing
- It is possible to perform the task with a limited space
- More resistant to scratching than a wash that is water-free
CONS:
- A handwash is more likely to cause scratches than handwash
- Can’t remove heavy contamination
- This requires greater equipment and tools than simple waterless wash
Method #4: Automatic Wash
Automatic car washes Also often referred to as “tunnel” washes, generally require you to drive your car onto conveyor belts that takes you through a sequence of blowers and brushes. The bristles of these rough brushes are typically contaminated with the abrasive residue of previous vehicles that can damage the surface. They also employ harsh cleaning chemicals that could remove coatings or waxes, and dry out the paint which could cause it to start cracking and even fade. So , why would anyone wish to make use of any of them? They’re affordable and take a short time to complete and are the most well-known type of wash, due to their ease of use. The majority of people don’t realize or care about how much the damage is to their paintwork. This isn’t necessarily a problem for professional detailers. All scratching is the reason many people pay for paintwork repair!
PROS:
- Inexpensive
- Fast
CONS:
- Causes excessive scratching
- Harsh chemicals can damage finish
- Might not be able to remove heavy contamination
Method #5: Brushless Wash
A “brushless car wash” is an automatic wash that utilizes strips of soft, soft cloths as bristles to clean its machine. It’s tempting to believe that it eliminates the problem of bristles that are abrasive tearing your finish, but dirty cloths can scratch the same way as bristles. Dirt that has been left from thousands of vehicles that arrived before you could damage your surface. Furthermore, these washes make use of similar harsh chemical as we have mentioned earlier.
PROS:
- Inexpensive
- Fast
- Abrasive less than a brush wash that is automatic
CONS:
- Causes substantial scratching
- Harsh chemicals can damage finish
- It is not possible to eliminate heavy contamination.
Method #6: Touchless Wash
A “touchless car wash” cleanses your car with no brushes or bristles. Instead the entire wash is performed by using chemical cleaners, high pressure washers, and pressurized air. It sounds like it will solve all the issues of other automated washes, doesn’t it? Well, not quite. First, you’ve faced with harsh chemicals to contend with. If you don’t want to let your paint dry or even risk stripping your coating ensure prior to time which type of chemicals they’re employing. Keep in mind that touchless washes and brushless washes are
It’s not
The identical. A few people hear “brushless” and assume that is “touchless”. Avoid the mistake! Make sure you do your homework prior to purchase and ensure you’re using the right type of wash.
PROS:
- Much less expensive than hand washing
- Fast
- Reduces scratching
CONS:
- More expensive than automated and brushless washes.
- Chemicals that are harsh can damage the finishes
- It is not possible to eliminate heavy contamination.
Other Methods
We’ve seen people wash their cars using just about anything you can think of, including paper towels and Windex. Of course, not because you
could
isn’t a way to say it doesn’t mean
Should
. If it’s not yet an everyday practice it’s likely to be some reason for that. Whatever ingenuous idea you think of you’re likely to harm your finishing. It’s not worth it.
Our Verdict
The most effective way to clean the finish of your vehicle is a handwash.
It’s the least abrasive washing that you can get without sacrificing quality. However, as with everything in life, sometimes , the optimal isn’t the case. What’s the second best (and fourth, third and fifth)? This is our list:
- Handwash
- Touchless wash (if using gentle soap)
- Rinseless wash
- Waterless wash
- Brushless wash
- Automatic wash
Agree? Disagree? Comment below!
